Digital Water Quality Tester with Seven Parameter Probe and Mobile App Alerts

Monitor Pool Chemistry More Accurately with This Digital Water Tester

You dip another test strip in the pool and squint at the faded color chart again. The colors never match exactly, and you're guessing whether the pH is actually safe or just close enough. This tester gives you exact digital readings for pH, salt, temperature, and four other metrics right on the backlit screen.

The probe measures seven water parameters when you dip it below the surface. It reads pH levels from 0.00 to 14.00, water temperature from 31.2 to 140.0 degrees, and oxidation potential up to 999 millivolts. The device also tracks electrical conductivity, total dissolved solids, salt concentration up to 10,000 parts per million, and specific gravity between 1.000 and 1.222.

The backlit LCD screen shows all readings clearly in direct sunlight or dim indoor light. It runs on three LR44 batteries and adjusts readings automatically based on water temperature between 32 and 140 degrees. The tester measures 7.4 by 1.5 by 1.5 inches and weighs 0.21 pounds, fitting in your hand or a poolside storage box.

The mobile app connects through your phone and logs every test you run. It sends alerts when any value goes outside your set range and stores historical data so you can track changes over weeks or months. The app works on both iOS and Android devices and lets you check pool conditions from inside your house.

• SEVEN PARAMETER TESTING: Measures pH, temperature, conductivity, total dissolved solids, salt, oxidation potential, and specific gravity in one device.
  
  
• AUTOMATIC TEMPERATURE ADJUSTMENT: Compensates readings based on water temperature from 32 to 140 degrees for consistent accuracy across seasons.
  
  
• BACKLIT LCD READOUT: Displays all seven metrics clearly on a digital screen that works in bright sun or low light conditions.
  
  
• MOBILE APP ALERTS: Sends notifications to your phone when pH, salt, or other levels move outside your safe range settings.
  
  
• HISTORICAL DATA LOGGING: Stores past readings in the app so you can review trends and adjust chemical schedules over time.
  
  
• COMPACT BATTERY OPERATION: Runs on three LR44 batteries and weighs just 0.21 pounds for easy storage in toolkits or poolside boxes.
  
  
• WIDE MEASUREMENT RANGES: Reads pH from 0.00 to 14.00, salt up to 10,000 ppm, and conductivity up to 400 milliSiemens per centimeter.

DIGITAL WATER QUALITY TESTER SPECS

• pH Range: 0.00–14.00
  
  
• Temperature Range: 31.2–140.0°F
  
  
• ORP Range: ±999 mV
  
  
• Conductivity: Up to 400.0 mS/cm
  
  
• TDS: Up to 200.0 ppt
  
  
• Salt Level: 0–10,000 ppm
  
  
• Specific Gravity: 1.000–1.222
  
  
• Power: 3 × LR44 Batteries
  
  
• Dimensions: 7.4 × 1.5 × 1.5 in
  
  
• Weight: 0.21 lb

PACKAGE INCLUDES:

• 1 x Digital Water Quality Tester